JAC M1 (Refine): Which Version Should You Buy?
The JAC M1 (Refine) catalogue data presents a straightforward buying decision: there is one generation and one listed version, the 2.4 MT. This Minivan was produced from 2006 to 2011, while the version’s own stop date is not measured.
The JAC M1 (Refine) catalogue data presents a straightforward buying decision: there is one generation and one listed version, the 2.4 MT. This Minivan was produced from 2006 to 2011, while the version’s own stop date is not measured. With no alternative engine, transmission, body, or generation to compare, choosing a JAC M1 (Refine) means deciding whether the 2.4 MT’s 136 hp Gasoline engine, Manual gearbox, RWD, performance, and fuel consumption suit your needs.
JAC M1 (Refine) generations compared
The JAC M1 (Refine) has one generation, so there is no earlier or later generation against which to measure changes in power, economy, dimensions, or equipment.
The 1 generation ran from 2006 to 2011. It uses a Minivan body and contains one listed version, the 2.4 MT. No restyling or additional body type is included in the supplied data. Because the catalogue contains only this generation, claims about generational improvements or regressions cannot be made from the available figures.
JAC M1 (Refine) engine and specs
The only listed choice is the 2.4 MT, powered by a 2351 cc Gasoline engine. It produces 136 hp (100 kW) at 5500 rpm and 193 Nm at 3000 rpm. Dividing the listed output by displacement gives approximately 57.8 hp per litre and 82.1 Nm per litre.
The engine has 4 cylinders in an Inline layout, with 4 valves per cylinder and No boost. Its fuel system is Distributed injection (multi-point), and the specified fuel is 92. Compression ratio, bore and stroke, and engine position are not measured.
| Version | Power | Torque | Displacement | Fuel | Cylinders | Layout | Boost | Gearbox | Drive |
|---|---|---|---|---|---|---|---|---|---|
| 2.4 MT | 136 hp (100 kW) at 5500 rpm | 193 Nm at 3000 rpm | 2351 cc | Gasoline, 92 | 4 | Inline | No | Manual, 5 gears | RWD |
There are no alternative versions with more power, a different fuel type, another gearbox, or another drive system in the data. Therefore, the 2.4 MT is neither a higher-output nor a lower-output option within this model range: it is the entire listed range.
JAC M1 (Refine) performance and fuel economy
The 2.4 MT accelerates from 0 to 100 km/h in 16 seconds and has a top speed of 160 km/h. Since there is only one version, there is no quicker or faster JAC M1 (Refine) configuration in the supplied catalogue to compare with it.
Fuel consumption for the 2.4 MT is 14 l/100 km in the city, 8.8 l/100 km on the highway, and 11 l/100 km combined. The city figure is 5.2 l/100 km higher than the highway figure, while the combined figure sits 3 l/100 km below the city result and 2.2 l/100 km above the highway result.
| Version | 0–100 km/h | Top speed | City consumption | Highway consumption | Combined consumption |
|---|---|---|---|---|---|
| 2.4 MT | 16 seconds | 160 km/h | 14 l/100 km | 8.8 l/100 km | 11 l/100 km |
The fuel tank holds 65 litres. Using the measured consumption figures for direct arithmetic, 65 litres corresponds to approximately 464 km at the city rate, 739 km at the highway rate, or 591 km at the combined rate. These are calculated comparisons, not measured driving-range figures.
CO₂ emissions are not measured. The listed environmental class is Euro 3.
JAC M1 (Refine) dimensions, weight, and chassis specs
Ground clearance for the 2.4 MT is 200 mm. Wheel sizes are not measured. Kerb weight and gross weight are also not measured, so weight per horsepower and payload cannot be calculated reliably.
| Version | Kerb weight | Gross weight | Ground clearance | Fuel tank | Wheel sizes |
|---|---|---|---|---|---|
| 2.4 MT | not measured | not measured | 200 mm | 65 litres | not measured |
Both the front and rear suspension are listed as Independent, spring. The front brakes are Disc, and the rear brakes are also Disc.
Because kerb weight is not measured, the 2.4 MT cannot be compared by kg per hp. Overall length, width, height, wheelbase, and cargo capacity are likewise not measured in the supplied data, so they cannot support the buying decision.
JAC M1 (Refine) reliability and problems
Reliability records and problem data are not measured. The supplied specifications do not report fault frequency, repair history, service intervals, component lifespan, or maintenance costs. It would therefore be unsupported to claim that the 2.4 MT has particular common problems or that it is more or less reliable than another version.
The specifications do establish that the 2.4 MT uses a naturally aspirated configuration—its boost value is No—with Distributed injection (multi-point), a Manual gearbox with 5 gears, and RWD. These describe the version’s mechanical layout but do not, by themselves, prove reliability.
Which JAC M1 (Refine) version should you buy?
Choose the 2.4 MT if its fixed specification matches your requirements: 136 hp, 193 Nm, a 2351 cc Gasoline engine, a Manual gearbox with 5 gears, and RWD. Its measured performance is 16 seconds from 0 to 100 km/h and 160 km/h at maximum speed. Its measured combined fuel consumption is 11 l/100 km, and its ground clearance is 200 mm.
There is no second version for buyers seeking lower consumption, stronger performance, Automatic transmission, or another drive type. There is also no second generation offering a documented change in those areas. Consequently, no extra money can be tied to extra power, torque, equipment, or efficiency from the supplied data, and no version-to-version premium can be justified numerically.
The practical verdict is simple: the 2.4 MT is the JAC M1 (Refine) to buy only if you specifically accept this single available combination. Before choosing an individual vehicle, obtain the missing measurements that matter to you—particularly kerb weight, gross weight, wheel sizes, and reliability history—because those values are not measured in this catalogue data.