Invicta S1: Which Version Should You Buy?
The Invicta S1 catalogue contains a single choice: the 4.6 MT Coupe from the model’s only generation, produced from 2004 to 2012. It combines a 4601 cm³ Gasoline engine with 325 hp, 407 Nm, a 5-speed Manual gearbox, and RWD.
The Invicta S1 catalogue contains a single choice: the 4.6 MT Coupe from the model’s only generation, produced from 2004 to 2012. It combines a 4601 cm³ Gasoline engine with 325 hp, 407 Nm, a 5-speed Manual gearbox, and RWD. Because there are no alternative engines, transmissions, body styles, or generations in the supplied data, choosing an S1 is less about comparing versions and more about deciding whether this exact specification suits you.
Invicta S1 generations compared
The Invicta S1 had 1 generation, built from 2004 to 2012. It was offered as a Coupe, and this generation contains 1 version, named exactly 4.6 MT. There are no other generations or versions in the catalogue data, so no numerical comparison of model-year changes, alternative power outputs, or restyled derivatives is possible.
This also means there is no generation that added more power, changed the gearbox, introduced another drive layout, or altered the body type. Buyers comparing Invicta S1 generations therefore have only one documented combination: the 2004–2012 Coupe 4.6 MT.
Invicta S1 specs and engine comparison
| Version | Power | Torque | Displacement | Fuel | Cylinders | Layout | Boost | Gearbox | Drive |
|---|---|---|---|---|---|---|---|---|---|
| 4.6 MT | 325 hp | 407 Nm | 4601 cm³ | Gasoline | 8 | V-shaped | No | 5-speed Manual | RWD |
The 4.6 MT develops 325 hp at 5900 rpm and 407 Nm at 4800 rpm. Its 4601 cm³ engine has 8 cylinders in a V-shaped layout, 4 valves per cylinder, and No boost. The engine is installed Front, longitudinal and uses Distributed injection (multi-point).
Calculated from the supplied displacement and output, the 4.6 MT produces approximately 70.6 hp per litre. Torque output is approximately 88.5 Nm per litre. These calculations help place the engine’s output in context, but there is no second S1 engine against which to compare them.
The engine’s compression ratio is 9.85, while the bore and stroke are 90.2 × 90. The specified fuel is 95. Power reaches the rear wheels through a 5-speed Manual gearbox and RWD, with no Automatic or AWD alternative included in the data.
Invicta S1 performance, fuel consumption, and mpg
The 4.6 MT accelerates from 0 to 100 km/h in 5 seconds and has a maximum speed of 290 km/h. With only one listed version, these are also the performance figures for the entire Invicta S1 range in this catalogue.
City fuel consumption is not measured. Highway fuel consumption is not measured, and combined fuel consumption is not measured. Consequently, an mpg figure cannot be calculated from the supplied data. CO₂ emissions are not measured, and the emissions class is not measured.
The available figures make performance easy to assess but do not support an economy comparison. A buyer can compare the stated 5-second acceleration and 290 km/h maximum speed with personal requirements, but should not infer city, highway, or combined consumption where no measurement is provided.
Invicta S1 weight, dimensions, and wheel specs
The 4.6 MT has a kerb weight of 1200 kg. Gross weight is not measured. Ground clearance is 145 mm, and fuel-tank capacity is 100 litres.
The listed wheel sizes are 255/35 R19 and 275/35 R19. Both the front and rear suspension are Independent, spring. The front brakes are Ventilated disc, while the rear brakes are listed as Disc ventilated.
Using the supplied kerb weight and power output, the 4.6 MT carries approximately 3.69 kg per hp. Expressed another way, it provides approximately 270.8 hp per tonne. These calculated ratios describe the only available S1 specification; they do not establish an advantage over another S1 version because none is listed.
Overall length, width, height, wheelbase, and luggage capacity are not measured in the supplied data. Those missing dimensions should not be estimated from the body type or wheel sizes.
Invicta S1 reliability and problems
Reliability results are not measured, and no problem or repair data is supplied for the 4.6 MT. The catalogue figures therefore cannot establish common faults, maintenance costs, component life, or differences in reliability between production years.
The mechanical specification can still guide an initial decision: every documented S1 uses the 4601 cm³ Gasoline engine, 5-speed Manual gearbox, and RWD. However, the available numbers do not justify claiming that one year is more dependable than another or that a different transmission would be easier to own.
Which Invicta S1 version should you choose?
Choose the 4.6 MT if you specifically want the combination represented by the S1 catalogue: a Coupe with 325 hp, 407 Nm, 5-speed Manual, and RWD. Its measured performance is 5 seconds from 0 to 100 km/h, with a maximum speed of 290 km/h. Its calculated output is approximately 70.6 hp per litre, while its calculated weight-to-power ratio is approximately 3.69 kg per hp.
There is no lower-powered version to prioritise for economy, no higher-powered version to select for additional performance, and no Automatic or alternative drive configuration in the supplied data. Fuel consumption is not measured, so the 4.6 MT cannot be recommended on the basis of mpg. Gross weight and several exterior dimensions are also not measured.
The buying decision is therefore straightforward: the 4.6 MT is the only documented Invicta S1 version and the only valid choice within this catalogue. Whether it is the right choice depends on accepting its fixed specification rather than choosing between trims. Price and for-sale information are not available in the data, so no conclusion can be made about value or what extra money would buy.