Which Changan Yida Version Should You Buy?
The Changan Yida catalogue data contains one generation and one version, so there is no choice between engines, transmissions, body styles, or generations. The only listed option is the 1.5 i AT, a Gasoline, FWD Sedan in production since 2023. Its 1500 cc engine produces 170 hp and 260 Nm, equal to about 113.3 hp per litre.
The Changan Yida catalogue data contains one generation and one version, so there is no choice between engines, transmissions, body styles, or generations. The only listed option is the 1.5 i AT, a Gasoline, FWD Sedan in production since 2023. Its 1500 cc engine produces 170 hp and 260 Nm, equal to about 113.3 hp per litre. With no alternative version in the supplied range, choosing a Yida means deciding whether this specific combination suits you rather than paying more for another engine or comparing different model years.
Changan Yida generations and version choice
The 1 generation began production in 2023 and remains in production according to the catalogue data. It is offered as a Sedan and contains one listed modification, the 1.5 i AT.
Because only one generation is present, there is no earlier Yida generation against which to measure changes in power, body design, engine capacity, or drivetrain. Likewise, the catalogue does not identify separate 2024, 2025, or 2026 versions. Those years fall within the continuing production period of the same generation, but the supplied data does not establish any year-by-year specification changes or a separate Yida Plus version.
Changan Yida engine and specs
The 1.5 i AT uses a front, transverse 1500 cc Gasoline engine with 4 Inline cylinders and 4 valves per cylinder. Direct injection (direct) is specified, while boost is not measured. Output is 170 hp, or 125 kW, with 260 Nm of torque. This works out to approximately 113.3 hp per litre and 83.3 kW per litre.
Power is delivered to FWD through a 7-speed Robotic gearbox. There is no second Yida version in the data with which to compare gearbox type, drive system, displacement, or output.
| Version | Power | Torque | Displacement | Fuel | Cylinders | Layout | Boost | Gearbox | Drive |
|---|---|---|---|---|---|---|---|---|---|
| 1.5 i AT | 170 hp / 125 kW | 260 Nm | 1500 cc | 92 | 4 | Inline | not measured | 7-speed Robotic | FWD |
The engine is mounted at the front in a transverse position. Power and torque engine speeds are not measured, so the catalogue cannot show where the 170 hp and 260 Nm peaks occur.
Changan Yida performance and economy
For the 1.5 i AT, acceleration from zero to 100 km/h is not measured and top speed is not measured. City fuel consumption, highway fuel consumption, and combined fuel consumption are also not measured. CO₂ emissions and the environmental class are not measured.
These omissions prevent a numerical performance or economy comparison, even within the single-version range. The available figures establish engine output and capacity, but they do not support an mpg claim, an acceleration ranking, or a conclusion about real-world fuel economy.
| Version | 0–100 km/h | Top speed | City consumption | Highway consumption | Combined consumption | CO₂ |
|---|---|---|---|---|---|---|
| 1.5 i AT | not measured | not measured | not measured | not measured | not measured | not measured |
Changan Yida dimensions, weight, and chassis
Kerb weight and gross weight for the 1.5 i AT are not measured. Ground clearance, fuel-tank capacity, and wheel sizes are also not measured. Consequently, weight per horsepower cannot be calculated: the required kerb-weight figure is absent. Payload cannot be derived either because neither gross nor kerb weight is available.
The chassis specification is more complete. The 1.5 i AT has Independent, spring front suspension and Semi-independent, springorts hélicoïdaux, sem rear suspension. Braking is handled by Ventilated disc brakes at the front and Disc brakes at the rear.
| Version | Kerb weight | Gross weight | Ground clearance | Tank | Wheel sizes |
|---|---|---|---|---|---|
| 1.5 i AT | not measured | not measured | not measured | not measured | not measured |
Changan Yida price, interior, problems, and reliability
Changan Yida price data is not measured, including price in Pakistan or any other market. With no prices or competing trim levels in the supplied catalogue, it is impossible to calculate what extra money buys or identify a better-value version.
Interior equipment is not measured. Reliability records and known problems are not measured as well. The data therefore supports no claim that one model year, specification, or version has a better interior or is more reliable than another.
Which Changan Yida version should you choose?
Choose the 1.5 i AT if the required format is a Sedan with a 1500 cc Gasoline engine, 170 hp, 260 Nm, a 7-speed Robotic gearbox, and FWD. Its key calculated figure is approximately 113.3 hp per litre, while the quoted torque corresponds to approximately 173.3 Nm per litre.
There is no higher-powered engine, alternative gearbox, AWD option, or other generation in the supplied data. As a result, there is no numerical basis for recommending one Changan Yida version over another: the 1.5 i AT is the entire listed range. The sensible buying decision is therefore to verify the missing figures—price, fuel consumption, performance, dimensions, weight, ground clearance, tank capacity, wheels, interior equipment, and reliability—rather than trying to choose between catalogue versions that are not present.